Advantech PCI-1220U

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Motion Control Cards > Advantech PCI-1220U

Advantech PCI-1220U

2-axis Stepping and Servo Motor Control Universal PCI Card

Advantech PCI-1220U
4805_15320.png
4805_10739.jpg
4805_10740.jpg
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • Independent 2-axis motion control
  • Hand wheel and jog function
  • 2-axis linear interpolation function
  • 2-axis circular interpolation function
  • Continuous interpolation function
  • Programmable T/S-curve acceleration/deceleration rate
  • Up to 4 Mpps output for each axis
  • Two pulse output types: CW/CCW or pulse/direction
  • Up to 1 MHz encoder input for each axis
  • Two encoder pulse input types: A/B phase or up/down
  • Constant speed control
  • Position management and software limit switch function
  • BoardID™ switch
Advantech´s PCI-1220U is a 2-axis Universal PCI stepping/pulse-type servo motor control card. This card adopts NOVA MCX312 IC which supports 2-axis motion control with interpolations. Besides, functions like continuous interpolation, programmable T/S-curve acceleration/deceleration, constant speed control are also accomplished. For users that only need to drive two motors at most, PCI-1220U is a cost-effective solution than 4-axis motion control cards. The DLL driver for PCI-1220U together with the utility make it easy for users to test the functionalities of the card and to develop their own application.
ProdGrafik

General

    Power Consumption
    Typical: 5 V @ 850 mA; Max.: 5 V @ 1 A

    Temperature (Operating)
    0 ~ 60°C (32 ~ 140°F)

    Humidity
    5 ~ 95% RH, non-condensing (IEC 60068-2-3)

    Temperature (Storage)
    -20 ~ 85°C (-4 ~ 185°F)

    Bus
    Universal PCI V2.2

    Dimensions
    175 x 100 mm (6.9" x 3.9")

    Connector
    1 x 50-pin SCSI Female Connector



Advanced Function

    Servo On Output Channels
    2



Encoder Interface

    Isolation Protection
    2,500 VDC

    Input Type
    Quadrature (A/B phase) or up/down

    Input Range
    0~2 VDC for low; 5~30 VDC for high

    Max. Input Frequency
    1 MHz



Axes

    Linear Interpolation
    V

    2-axis Circle Interpolation
    V

    Number of Axes
    2



Advanced Functions

    General Purpose DO Channels
    8

    General Purpose DI Channels
    6



Pulse Type Motion Control

    Motor Driver Support
    Servo/stepping

    Interpolation
    2-axis linear, 2-axis circular



Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.