Barix Annuncicom PS Touch
Desktop IP Intercom and paging master station, PoE capable, large compatibility
- TCP/IP, RTP, UDP, ICMP, DHCP, SNMP
- 5-Watt output speaker
- AACplus, MP3, Ogg Vorbis, G.711, G.722, PCM Decoding
- XLR microphone connector with 13 Volt bias voltage
- Simple Paging firmware preinstalled
- Power over Ethernet (PoE)
- 14 Softtouch Zone Selectors, 1 Hardware Paging Button
The Barix Paging Station Annucicom PS Touch is a universal, TCP/IP connected intercom station for use in IP Intercom, Paging and VoIP applications. The PS Touch directly connects to the network via a 10/100Mbps network connection, and is powered over the network interface (PoE, 802.3af standard). The station can be used as a master station for IP based intercom and paging systems, which can be built without any central servers or PCs.
The PS Touch is equipped with a touch screen display, an XLR connected professional gooseneck microphone and a built-in speaker. Optional flash memory for stored messages and announcements is available. It replaces the PS 16 (see discontinuance notice). Annuncicom PS Touch is delivered with Barix Simple Paging Master station firmware. Additional firmware support on request.
Technical Specifications
- Power Supply Input
- Powered over the network interface (PoE, 802.3af standard). 1 Ethernet Interfaces
- RJ45 10/100 auto detect, IPv4, IPv6
- TCP/IP, RTP, UDP, ICMP, DHCP, SNMP
- XLR microphone connector with 13 Volt bias voltage
- 5-Watt output speaker
- 10.1” size
- Touch type: capacitive
- 1024x600 pixel resolution
- backlight LED >30,000 hours
- > 1 million touches
- Supports Barix Simple Paging
- IC Paging on request at order
- SIP on request
- Barix IPAM302
- Simple Paging firmware preinstalled
- Web interface for control, status and configuration
- Metal
- ~350x250x150mm (13.8x9.8x5.9 inch) without microphone
- 2500g
- 30’000 hours
Audio Input
Audio output
Touch Screen
Barix solution support
HW/SW environment
User Interface
Case
MTBF
Kunder, der kiggede på dette produkt, kiggede også på