Advantech ADAM-6150EI
15-ch Isolated Digital I/O EtherNet/IP Module
- EtherNet/IP protocol
- 8-ch digital input and 7-ch digital output (sink)
- Normal output current: 0.1 A (per channel)
- 2 x RJ-45 LAN (daisy chain)
Advantech’s ADAM-6100 series is a new line of Industrial Ethernet Remote I/O modules. Designed with 2,500 VDC isolation protections, ADAM-6150EI, 15-ch isolated digital I/O EtherNet/IP module, is very resistant to field interference. It is also equipped with the EtherNet/IP protocol, and allows daisy chain connections, making it possible to transfer data much faster during process control and other industrial automation applications. Daisy chain connectivity provides a more scalable system with fewer wires to help avoid interference common in factory settings. More importantly, Advantech’s ADAM.NET Utility comes bundled with each ADAM-6100 module, allowing users to configure, set, and test ADAM-6100 modules through Ethernet.
Display
LED Indicators
Status, Comm, Link, Speed
Power Supply
Power Requirement
10~30 VDC
General
Watchdog Timer
System (1.6 second) & Communication (programmable)
Connector
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
20~95 %RH
Temperature (Storage)
-20~80 °C (-4~176 °F)
Interface
10/100Base-T(X)
Peer-to-Peer
No
GCL
No
Isolation Protection
2500 VDC
Communication Protocol
EtherNet/IP
Communication Speed
Ethernet: 10/100Mbps
Comm. Distance
Ethernet: 100 m
Digital Input
Channles
8
Input Voltage
Dry contact: Logic level 0: close to GND Logic level 1: open
Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output
Channels
7 (Sink type) 8~35V, 100 mA per channel
General
LAN
10/100Base-T(X)
Power Consumption
ADAM-6150: 3 W @ 24 V DC
ADAM-6151: 2.7 W @ 24 V DC
ADAM-6156: 3.2 W @ 24 V DC
Connectors
2 x RJ-45 LAN, (Daisy Chain)
Plug-in screw terminal block (I/O and power)
Watchdog
System (1.6 second)
Power Input
10 ~ 30 V DC
Protection
Over Voltage Protection
±35 V DC
Isolation Protection
2,500 V DC
Power Reversal Protection
Environment
Operating Temperature
-10 ~ 70°C (14 ~ 158°F)
Storage Temperature
-20 ~ 80°C (-4 ~ 176°F)
Operating Humidity
20 ~ 95% RH (non-condensing)
Storage Humidity
0 ~ 95% RH (non-condensing)
Ordering Information
ADAM-6150EI
LED Indicators
Status, Comm, Link, Speed
Power Supply
Power Requirement
10~30 VDC
General
Watchdog Timer
System (1.6 second) & Communication (programmable)
Connector
2 x RJ-45 (LAN, Daisy Chain) & 2 x plug-in terminal block (I/O and power)
Temperature (Operating)
-10~70 °C (14~158 °F)
Humidity
20~95 %RH
Temperature (Storage)
-20~80 °C (-4~176 °F)
Interface
10/100Base-T(X)
Peer-to-Peer
No
GCL
No
Isolation Protection
2500 VDC
Communication Protocol
EtherNet/IP
Communication Speed
Ethernet: 10/100Mbps
Comm. Distance
Ethernet: 100 m
Digital Input
Channles
8
Input Voltage
Dry contact: Logic level 0: close to GND Logic level 1: open
Wet contact: Logic level 0: 0~3 VDC Logic level 1: 10~30 VDC
Digital Output
Channels
7 (Sink type) 8~35V, 100 mA per channel
General
LAN
10/100Base-T(X)
Power Consumption
ADAM-6150: 3 W @ 24 V DC
ADAM-6151: 2.7 W @ 24 V DC
ADAM-6156: 3.2 W @ 24 V DC
Connectors
2 x RJ-45 LAN, (Daisy Chain)
Plug-in screw terminal block (I/O and power)
Watchdog
System (1.6 second)
Power Input
10 ~ 30 V DC
Protection
Over Voltage Protection
±35 V DC
Isolation Protection
2,500 V DC
Power Reversal Protection
Environment
Operating Temperature
-10 ~ 70°C (14 ~ 158°F)
Storage Temperature
-20 ~ 80°C (-4 ~ 176°F)
Operating Humidity
20 ~ 95% RH (non-condensing)
Storage Humidity
0 ~ 95% RH (non-condensing)
Ordering Information
ADAM-6150EI
- 15-ch Isolated DI/O EtherNet/IP Module
Kunder, der kiggede på dette produkt, kiggede også på