MOXA NPort 5600-8-DT Desktop Series

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Device Server > MOXA NPort 5600-8-DT Desktop Series

MOXA NPort 5600-8-DT Desktop Series

Compact 8-port Serial Device Servers

MOXA NPort 5600-8-DT Desktop Series
1669_12237.png
1669_2416.gif
1669_8678.jpg
1669_8679.jpg
1669_8680.jpg
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • 8 serial ports supporting RS-232/422/485
  • Compact desktop design
  • 10/100M auto-sensing Ethernet
  • Built-in 15 KV ESD protection for all serial signals
  • Easy IP address configuration with LCD panel
  • Choice of configuration methods: Web console, Telnet console, and Windows utility
  • Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
  • SNMP MIB-II for network management
  • Supports Moxa´s MXview industrial network management software via the MXview Plug-in

NPort® 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort® 5600-8-DT device servers have a smaller form factor compared to our 19" models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.

Convenient Design for RS-485 Applications

The NPort® 5650-8-DT device servers support selectable 1K-ohm and 150K-ohm pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.

Convenient Power Inputs

The NPort® 5650-8-DT device servers support both a power terminal block and power jack for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adaptor.

LED Indicators to Ease Your Maintenance Tasks

The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

Two Ethernet Ports for Convenient Cascade-style Wiring
The NPort® 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.

Automatic Warning Function by Speaker and/or E-mail

The built-in speakers can be used to alert administrators of problems with the Ethernet links or power input. The web console indicates which Ethernet link or power input has failed. An e-mail warning can also be issued when an exception is detected. These functions are valuable tools that enable maintenance engineers to react promptly to emergency situations.

ProdGrafik

Ethernet Interface

Number of Ports
2 (1 IP)

Speed
10/100 Mbps, auto MDI/MDIX

Connector
8-pin RJ45

Magnetic Isolation Protection
1.5 KV built-in


Serial Interface

Number of Ports
8

Serial Standards
NPort 5610-8-DT: RS-232
NPort 5650-8-DT: RS-232/422/485

Connector
NPort 5610-8-DT/5650-8-DT/5650I-8-DT: DB9 male
NPort 5610-8-DT-J/5650-8-DT-J: RJ45 (8 pins)

Serial Line Protection
15 KV ESD protection for all signals
2 KV isolation protection (NPort 5650I-8-DT only)

RS-485 Data Direction Control
ADDC® (automatic data direction control)

Pull High/Low Resistor for RS-485
1 KÙ, 150 KÙ

Terminator for RS-485
120 Ù


Serial Communication Parameters

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF

Baudrate
50 bps to 921.6 Kbps


Serial Signals

RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422
Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w
Data+, Data-, GND


Software

Network Protocols
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP, RFC2217

Configuration Options
Web Console, Telnet Console, Serial Console, Windows Utility

Windows RealCOM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64, 2012 x64, Embedded CE 5.0/6.0, XP Embedded

Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i

Linux Real TTY Drivers
Linux kernel 2.4.x, 2.6.x, 3.x


Mini Screen with Push Buttons

LCD Panel
Liquid Crystal Display on the case

Push Buttons
Four push buttons for convenient on-site configuration


Physical Characteristics

Housing
Metal, IP30 protection

Weight
NPort 5610-8-DT: 1760 g
NPort 5610-8-DT-J: 1710 g
NPort 5650-8-DT: 1770 g
NPort 5650-8-DT-J: 1710 g
NPort 5650I-8-DT: 1850 g

Dimensions Without ears: 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in)
With ears: 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in)
With DIN-Rail kit on bottom panel: 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in)


Environmental Limits

Operating Temperature
0 to 55°C (32 to 131°F)

Storage Temperature
-20 to 70°C (-4 to 158°F)

Ambient Relative Humidity
5 to 95% (non-condensing)


Power Requirements

Input Voltage
12 to 48 VDC

Power Consumption
NPort 5610-8-DT:
611 mA @ 12 V, 300 mA @ 24 V, 140 mA @ 48 V
NPort 5610-8-DT-J:
611 mA @ 12 V, 300 mA @ 24 V, 140 mA @ 48 V
NPort 5650-8-DT:
615 mA @ 12 V, 300 mA @ 24 V, 156 mA @ 48 V
NPort 5650I-8-DT:
1066 mA @ 12 V, 510 mA @ 24 V, 200 mA @ 48 V
NPort 5650-8-DT-J:
615 mA @ 12 V, 300 mA @ 24 V, 156 mA @ 48 V


Standards and Certifications

Safety
UL 60950-1, EN 60950-1

EMC
CE, FCC

EMI
EN 55022 Class A, FCC Part 15 Subpart B Class A

EMS
EN 55024


Reliability

Alert Tools
Built-in buzzer and RTC (real-time clock)

Automatic Reboot Trigger
Built-in WDT (watchdog timer)

MTBF (mean time between failures)
163,356 hrs


Ordering Information
NPort 5610-8-DT 8-port RS-232 serial device server, DB9 connectors, desktop model
NPort5610-8-DT-J 8-port RS-232 serial device server, RJ45 connectors, desktop model
NPort 5650-8-DT 8-port RS-232/422/485 serial device server, 12 to 48 VCD power input, desktop model
NPort 5650I-8-DT NPort 5650-8-DT with 2 KV isolation
NPort 5650-8-DT-J 8-port RS-232/422/485 serial device server, RJ45 connectors, desktop model
Above items include:
  • 1 NPort 5600-8-DT Device Server
  • Quick Installation Guide
  • Power Cord (AC Model Only)
  • Power Adaptor
  • DIN-Rail Kit
Optional Accessories
DK-35A DIN-Rail Mounting Kit (35 mm)
CBL-RJ45M9-150 RJ45 8-pin to DB9 Male cable, 150 cm
CBL-RJ45F9-150 RJ45 8-pin to DB9 Female cable, 150 cm
CBL-RJ45M25-150 RJ45 8-pin to DB25 Male cable, 150 cm
CBL-RJ45F25-150RJ45 8-pin to DB25 Female cable, 150 cm
NP21101DB25(M) to DB9(F) RS-232 cable, 30 cm


Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.