MOXA CP-602E-I Series

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > CAN Interface Boards > MOXA CP-602E-I Series

MOXA CP-602E-I Series

2-port CAN interface PCI Express board with 2 KV isolation

MOXA CP-602E-I Series
2670_24092.png
2670_24093.png
2670_24094.png
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • CAN 2 .0A and CAN 2.0B supported
  • Two independent CAN communication ports
  • CAN transfer rate up to 1 Mbps
  • 2 KV optical isolation protection
  • LED for transmit/receive status on each port
  • Optional 120 ohm terminal resistor for CAN bus network
  • DLL library and examples included
  • Windows driver provided
Moxa’s new CP-602E-I CAN (Controller Area Network) interface board supports the PCI Express interface. As a stand-alone CAN controller, the CP-602E-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP- 602E-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide the bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602E-I-T only) and 2 KV isolation make the boards suitable for use in harsh industrial environments.
ProdGrafik

Hardware

Connectors
DB9 male x 2

CAN Controller
NXP SJA1000

CAN Transceiver
PCA82C251

CAN Specification
CAN 2.0 A/B

Signal Support
CAN_H, CAN_L, GND

Transfer Rate
1 Mbps

Max. Number of Boards per PC
4

Electrical Isolation
2 kV

Termination Resistor
120 ohm (selected by jumper)


Driver Support

Operating Systems
Windows 2000, Windows XP/2003/Vista/2008 (x86/x64)

Linux Real TTY Drivers
Linux 2.6.x, 3.x


Software

Libraries
Visual C/C++, Borland C/C++


Environmental Limits

Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.


Standards and Certifications

EMC
CE, FCC

EMI
EN 61000-3-2, EN 61000-3-3, FCC Part 15 Subpart B Class B

EMS
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11 (DIPS)

Green Product
RoHS, CRoHS, WEEE


MTBF (mean time between failures)

Time
248,563 hrs

Database
Telcordia (Bellcore), GB


Power Requirements

Power Consumption
780 mA @ 5 VDC



Ordering Information
CP-602E-I: 2-port CAN interface PCI Express board, with 2 KV optical isolation protection, 0 to 55°C operating temperature
CP-602E-I-T: 2-port CAN interface PCI Express board with 2 KV optical isolation protection, -40 to 85°C operating temperature


Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.