MOXA EDS-405A-PN / EDS-408A-PN Series

The EDS-405A-PN/408A-PN are 5 and 8-port managed Ethernet switches with PROFINET enabled. With embedded PROFINET, the PN switches can be easily integrated into the Simatic Step 7 engineering tool. It is more convenient for automation engineers to configure through Step 7 and monitor with automation HMIs. The EDS-405A/408A-PN switches with fast booting, Turbo Ring and Turbo Chain fast-recovery technology, can optimize PROFINET network performance. Moxa’s PROFINET switches also support a variety of useful management functions, such as IGMP snooping, IEEE 802.1Q VLAN, QoS, port mirroring, SNMP, bandwidth management, and warning by email or relay.

Technology

Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging

Protocols
IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/ Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog, DHCP Option 66/67/82, BootP, LLDP, PROFINET, EtherNet/IP, Modbus/TCP, IPv6, NTP Server/Client

MIB
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP
MIB, RMON MIB Group 1, 2, 3, 9

Flow Control
IEEE 802.3x flow control, back pressure flow control


Switch Properties

MAC Table Size
2 K (EDS-405A-PN), 8 K (EDS-408A-PN)

Packet Buffer Size
1 Mbit

Interface

RJ45 Ports
10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection

Console Port
RS-232 (RJ45 connector)

DIP Switches
Turbo Ring, Master, Coupler, Reserve

LED Indicators
PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL, 10/100M

Alarm Contact
1 relay output with current carrying capacity of 1 A @ 24 VDC


Power Requirements

Input Voltage
24 VDC (12 to 45 VDC), redundant dual inputs

Input Current
EDS-405A-PN: 0.24 A @ 24 V
EDS-408A-PN: 0.26 A @ 24 V

Overload Current Protection
Present

Connection
1 removable 6-contact terminal block

Reverse Polarity Protection
Present


Physical Characteristics

Housing
Metal, IP30 protection

Dimensions
53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)

Weight
650 g

Packing Weight
EDS-405A-PN series: 1140 g
EDS-408A-PN series: 1220 g

Installation
DIN-rail mounting, wall mounting (with optional kit)


Environmental Limits

Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)


Standards and Certifications

Safety
UL 508, UL 60950-1, CSA C22.2 No. 60950-1,
EN 60950-1* (*EDS-408A-PN only)

Hazardous Location
UL/cUL Class 1 Division 2 Groups A/B/C/D, ATEX Zone 2 Ex nA nC IIC

EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,
EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8

Marine
DNV, GL

Traffic Control
NEMA TS2

Rail Traffic
EN 50121-4* (*EDS-408A-PN only)

Shock
IEC 60068-2-27

Freefall
IEC 60068-2-32

Vibration
IEC 60068-2-6


MTBF (mean time between failures)

Time
EDS-405A-PN Series: 392,000 hrs
EDS-408A-PN Series: 363,000 hrs

Database
Telcordia (Bellcore), GB



Ordering information

EDS-408A-PN	Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, 0 to 60°C operating temperature, PROFINET enabled
EDS-408A-PN-T	Entry-level managed Ethernet switch with 8 10/100BaseT(X) ports, -40 to 75°C operating temperature, PROFINET enabled
EDS-405A-PN	Entry-level managed Ethernet switch with 5 0/100BaseT(X) ports, 0 to 60°C operating temperature, PROFINET enabled
EDS-405A-PN-T	Entry-level managed Ethernet switch with 5 10/100BaseT(X) ports, -40 to 75°C operating temperature, PROFINET enabled