Gefen GEF-MOD-848

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Video Matrix > Gefen GEF-MOD-848

Gefen GEF-MOD-848

8x8 Modular Matrix

Gefen GEF-MOD-848
3584_5752.jpg
3584_5753.png
3584_5754.png
3584_5755.png
3584_5756.png
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • Modular input and output card, each with eight connectors
  • Supports resolutions up to 1920 x 1200
  • Advanced EDID management for rapid integration of sources and displays
  • RS-232 Serial interface for remote control via a computer or automation control system
  • Built in Web server, Telnet, and UDP control via IP
  • IR control via front panel sensor and rear panel IR port
  • Front-panel LCD display
  • Front-panel push buttons for local switching
  • Routing states can be stored and recalled at the touch of a button
  • Dual redundant hot-swappable power supplies
  • Removable and replaceable fan and filter modules
  • Output masking command
  • Rack-mountable
Route any eight digital sources to any eight outputs with local or extended CAT-5 or Fiber Optic cables

The GefenPRO 8x8 Modular Matrix provides an all-in-one professional solution to route up to 8 DVI or DisplayPort sources to any 8 DVI outputs, supporting resolutions up to 1920 x 1200. The modular design of this 8x8 matrix provides the ultimate in flexibility by allowing the combination of different input and output cards and the extension of inputs and outputs over CAT5-ELR or fiber. The front-panel LCD displays the current routing status. Each source is accessible to any display by using the front-panel push buttons, the RS-232 interface, or through IP Control (with built-in web server, Telnet, and UDP). Hot-swappable dual redundant power supplies allow these matrixes to be used in demanding 24/7 applications where enhanced reliability, ease of servicing, and zero down-time are required.


How It Works

Connect up to 8 DVI or DisplayPort sources to the inputs on the GefenPRO 8x8 Modular Matrix. DVI sources can be connected directly, or using CAT-5 or fiber, depending on input card used. Connect up to 8 displays via DVI, CAT-5, or Fiber Optic cables depending on which output card is utilized. Connect an Ethernet cable from the network to the RJ-45 connector to use the built-in web server, Telnet, or UDP capability to control routing, EDID, and other functions. Connect an RS-232 cable from a RS-232 control device to control the matrix via RS-232. Connect the included AC power cords to the matrix and plug them into available electrical outlets. All sources will be routed as selected.

GefenPRO Advantage

GefenPRO supports demanding professionals with invaluable equipment for commercial and broadcast environments. With its expanded hardware, internal power supplies, robust rack mountable enclosures, and 2 year warranty with 24/7 customer support, the GefenPRO Modular Matrix will always perform in the most technically challenging environments.
ProdGrafik
Specifications

  • Maximum Pixel Clock: 165 MHz
  • Video Input Connectors: (8) depending upon the type upon the type of input module used:
  • DVI: (8) DVI-I, 29-pin, female (digital only)
  • DisplayPort: (8) 20-pin, female (digital only)
  • ELR-POL: (8) RJ-45
  • Fiber: (8) SC
  • Video Output Connectors: (8) organized into banks of 8 depending upon the type of output module used:
  • DVI: (8) DVI-I, 29-pin, female (digital only)
  • ELR-POL: (8) RJ-45
  • Fiber: (8) SC
  • RS-232 serial port: DB-9, female
  • Ethernet (IP control) port: RJ-45 jack, female
  • IR ports: (1) sensor, front panel
  • (1) 3.5mm stereo mini-phone jack, rear panel
  • Power Supplies: (2) 100 - 240V AC (dual IEC hot-swappable)
  • Power Consumption: 460W (each power supply)
  • Rack-Mountable: 3U rack height, rack ears included
  • Dimensions (W x H x D): 17.5" x 5.25" x 15" (443mm x 133mm x 381mm )
  • Shipping Weight: 23 lbs. (10.5 kg)


Flexible modular design allows customization of the configuration for input and output card to match every need of the system and application. The core of the system consists of the 8x8 Modular Matrix frame; a powerful, expandable video distribution hub that contains two expansion bays. One is for an input card, and the other is reserved for output cards. For the input card, you can select between DVI, Fiber Optic, ELR (CAT-5), and/or DisplayPort. For the output card, there are also multiple options. Firstly you can have a basic Modular Matrix 8 DVI Output card for use when you don’t need extension. If you need signal extension, there are two options: one uses fiber optic, while the other utilizes CAT-5 and ELR Outputs. If the display connects to a Receiver unit, the Receiver unit will convert the signal back to DVI. The ELR-POL Receiver unit is powered over the CAT-5 cable.
Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.