MOXA EDS-G205-1GTXSFP Series
5G-port full Gigabit unmanaged Ethernet switches
- Fiber optic options for extending distance and electrical noise immunity
- Redundant dual 12/24/48 VDC power inputs
- Supports jumbo frame transmission up to 10 KB
- Relay output warning for power failure and port break alarm
- Broadcast storm protection
- -40 to 75°C operating temperature range (T models)
The EDS-G205-1GTXSFP are equipped with 5 Gigabit Ethernet ports, respectively, and up to 1 fiber optic ports, making them ideal for applications that demand high bandwidth. The EDS-G205-1GTXSFP switches provide an economical solution for your industrial Gigabit Ethernet connections, and the built-in relay warning function alerts network managers when power failures or port breaks occur. In addition, the add-on 4-pin DIP switches can be used for controlling over the functions of broadcast protection, jumbo frame, IEEE 802.3az energy saving and 100/1000 SFP speed switching is ideal for easy on-site configuration for any industrial automation application. Two models are available in this series. One model has an operating temperature range of -10 to 60°C, and the other model has an extended operating temperature range of -40 to 75°C. Both models undergo a 100% burn-in test to ensure that they fulfill the special needs of industrial automation control applications. The EDS-G205-1GTXSFP switches can be installed easily on a DIN-rail or in distribution boxes.
Technology
Standards
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.3az for Energy-Efficient Ethernet
Processing Type
Store and Forward
Flow Control
IEEE 802.3x flow control, back pressure flow control
Switch Properties
MAC Table Size
8 K
Packet Buffer Size
1024 kbit
Jumbo Frame Size
10 KB
Interface
RJ45 Ports
10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection
Fiber Ports
100/1000BaseSFP slot (SFP model)
DIP Switches
One for port break alarm, one for Enable/Disable broadcast storm protection, jumbo frame, IEEE 802.3az energy saving and 100/1000 SFP speed switching
LED Indicators
PWR1, PWR2, FAULT, 10/100/1000M
Alarm Contact
1 relay output with current carrying capacity of 1 A @ 24 VDC
Power Requirements
Input Voltage
12/24/48 VDC (9.6 to 60 VDC), redundant dual inputs
Input Current
EDS-G205-1GTXSFP: 0.16 A @ 24 V
Connection
1 removable 6-contact terminal block
Reverse Polarity Protection
Present
Physical Characteristics
Housing
Metal, IP30 protection
Dimensions
EDS-G205-1GTXSFP Series: 29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in)
Weight
EDS-G205-1GTXSFP Series: 290 g
Installation
DIN-rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
Safety
UL 508
Hazardous Location
UL/cUL Class 1 Division 2 Groups A/B/C/D,
ATEX Zone 2 Ex nA nC IIC T4 Gc (Pending)
EMI
FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS
EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,
EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3
Rail Traffic
EN-50121-4
Marine
DNV, GL, LR, ABS, NK (Pending)
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
MTBF (mean time between failures)
Time
2,823,446 hrs
Database
Telcordia (Bellcore), GB
Ordering Information
- EDS-G205-1GTXSFP
- EDS-G205-1GTXSFP-T
Kunder, der kiggede på dette produkt, kiggede også på