MOXA MiiNePort E3 Series

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Embedded Device Server > MOXA MiiNePort E3 Series

MOXA MiiNePort E3 Series

10/100 Mbps embedded serial device servers with RJ45

MOXA MiiNePort E3 Series
4099_27942.png
4099_27943.png
4099_27944.png
4099_27945.png
4099_27946.png
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • IEEE 802.3af compliant PoE pass-through
  • Use Moxa’s high quality and reliable second generation MiiNe SoC
  • Versatile choice of operation modes fulfill specific application requirements
  • Green design with extremely low power consumption
  • MiiNePort NetEZ Technology makes integration incredibly easy
  • Highly compact embedded device module
  • Support IPv6
The MiiNePort E3 is empowered by the MiiNe, Moxa’s second generation SoC, which supports 10/100 Mbps Ethernet, up to 921.6 kbps serial baudrate, a versatile selection of ready-to-use operation modes, and requires only a small amount of power. By using Moxa’s innovative NetEZ technology, the MiiNePort E3 can be used to convert any device with a standard serial interface to an Ethernet enabled device in no time. In addition, the MiiNePort E3 is a compact embedded device server with an RJ45 connector, making it easy to fit into virtually any existing serial device.

The MiiNe—Moxa’s 2nd Generation SoC

The MiiNe was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution. The MiiNePort E3, which uses the MiiNe for its SoC, is a compact embedded device server that has the lowest power consumption of similar products. The MiiNe has the following features:
  • Designed for serial-to-Ethernet applications
  • Uses an ARM core
  • Uses Moxa’s own advanced UART technology
  • 2 MB Flash and 4 MB SDRAM memory built in
    ProdGrafik
  • Form Factor

    Type
    Pin header module

    Dimensions
    35 x 52.5 x 18 mm (1.38 x 2.07 x 0.71 in)

    Weight
    12 g


    System Information

    CPU
    32-bit ARM Core

    RAM
    4 MB built in

    Flash
    2 MB built in


    Ethernet Interface

    Number of Ports
    1

    Speed
    10/100 Mbps, auto MDI/MDIX

    Magnetic Isolation Protection
    1.5 kV built-in

    Connector
    RJ45 (magnetic)

    LEDs
    10BASE-T & 100BASE-TX Link Activity

    PoE Pass-through
    802.3af compliant


    Serial Interface

    Number of Ports
    1

    Transmission Format
    Standard TTL


    Serial Communication Parameters

    Data Bits
    5, 6, 7, 8

    Stop Bits
    1, 1.5, 2

    Parity
    None, Even, Odd, Space, Mark

    Flow Control
    RTS/CTS, DTR/DSR, XON/XOFF

    Baudrate (non-standard baudrates supported)
    MiiNePort E3: 50 bps to 230.4 kbps
    MiiNePort E3-H: 50 bps to 921.6 kbps


    Serial Signals

    TTL
    TxD, RxD, RTS, CTS, DTR, DSR, DCD, RST (reset circuit), GND


    Digital I/O Pins

    GPIO
    4 configurable I/O pins


    Software

    Network Protocols
    ICMP, ARP, IPv4/v6, TCP, UDP, DHCP, HTTP, SNMP V1, SMTP, TFTP, Auto IP, Telnet, BOOTP

    Configuration Options
    Web Console, Serial Console (Serial Command Mode), Telnet Console, Windows Utility

    Windows Real COM Drivers
    Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

    Fixed TTY Drivers
    SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

    Linux Real TTY Drivers
    Linux 2.4.x, 2.6.x, 3.x

    Operation Modes
    Real COM, TCP Server, TCP Client, UDP, Ethernet Modem, RFC2217

    NetEZ function
    EZPower, EZPage, SCM (Serial Command Mode), AutoCFG


    Environmental Limits

    Operating Temperature
    Standard Models: 0 to 55°C (32 to 131°F)

    Wide Temp. Models:
    -40 to 85°C (-40 to 185°F)

    Storage Temperature (package included)
    -40 to 60°C (-40 to 140°F)

    Ambient Relative Humidity
    5 to 95% (non-condensing)

    Altitude
    Up to 2000 m

    Note
    Please contact us if you require products guaranteed to function properly at higher altitudes.


    Power Requirements

    Input Voltage
    3.3 to 5 VDC (±5%)

    Power Consumption
    157 mA @ 3.3 VDC, 119 mA @ 5 VDC input max.


    Standards and Certifications

    EMI
    EN 55022 Class B, EN 61000-3-2, EN 61000-3-3

    EMS
    EN 55024,
    EN 61000-4-2 (ESD),
    EN 61000-4-3 (RS),
    EN 61000-4-4 (EFT),
    EN 61000-4-5 (Surge),
    EN 61000-4-6 (CS),
    EN 61000-4-8,
    EN 61000-4-11

    Shock
    IEC-68-2-27

    Vibration
    IEC-68-2-6


    Reliability

    MTBF (mean time between failures)
    3,608,031 hrs



    Available Models

    MiiNePort E3
      Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 230.4 Kbps baudrate, 0 to 55°C operating temperature

    MiiNePort E3-H
      Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 921.6 Kbps baudrate, 0 to 55°C operating temperature

    MiiNePort E3-T
      Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 230.4 Kbps baudrate, -40 to 85°C operating temperature

    MiiNePort E3-H-T
      Embedded device server for TTL devices, pin header module, 10/100M with RJ45 connector, 50 bps to 921.6 Kbps baudrate, -40 to 85°C operating temperature

    MiiNePort E3-ST
      Starter kit for the MiiNePort E3 Series, module included

    MiiNePort E3-H-ST
      Starter kit for the MiiNePort E3-H Series, module included

    Kunder, der kiggede på dette produkt, kiggede også på
    Accept all Reject Configure

    This website uses cookies to provide the best possible experience. More information.