Advantech BB-485DRCI
Triple Isolated RS-232 to RS-422/485 Converter
![Advantech BB-485DRCI](https://www.sphinxcomputer.de/produktdb/images/products/4491_32939.png)
![4491_32939.png](https://www.sphinxcomputer.de/produktdb/images/products/4491_32939.png)
![4491_32940.jpg](https://www.sphinxcomputer.de/produktdb/images/products/4491_32940.jpg)
![4491_32941.jpg](https://www.sphinxcomputer.de/produktdb/images/products/4491_32941.jpg)
![4491_32942.jpg](https://www.sphinxcomputer.de/produktdb/images/products/4491_32942.jpg)
- Data rates up to 115.2 kbps
- Three-way 2,000V optical isolation (input, output, power)
- Wide operating temperature
- UL Class 1/Division 2
- Modbus ASCII/RTU compatible
- 10–48 VDC input power range
Model 485DRCi industrial-grade isolated serial converter changes RS-232 signals to RS-422 for increased range, or to RS-485 for increased range plus multi-drop capability.
Designed for rugged industrial use, the 485DRCi is UL approved and certified for operation in Class 1/Division 2 environments and also offers 2,000V 3-way optical isolation on input, output, and power lines. In addition to optical isolation, the unit has surge suppression on the RS-422/485 lines. This DIN rail mountable converter optically isolates and converts unbalanced, full or half-duplex, RS-232 signals to balanced RS-422/485 signals at baud rates up to 115.2 kbps. Configuration is made via a 12-position DIP switch on the bottom of the converter.
Featuring Automatic Send Data Control circuitry, the converter does not require special software control of handshake signals in RS-485 mode. Removable terminal blocks for power and RS-422/485 signals make wiring easy. It is powered by a supply voltage of 10 to 48 VDC which is isolated from all data and signal ground lines.
![ProdGrafik](https://www.sphinxcomputer.de/produktdb/images/products/4491_32942.jpg)
Designed for rugged industrial use, the 485DRCi is UL approved and certified for operation in Class 1/Division 2 environments and also offers 2,000V 3-way optical isolation on input, output, and power lines. In addition to optical isolation, the unit has surge suppression on the RS-422/485 lines. This DIN rail mountable converter optically isolates and converts unbalanced, full or half-duplex, RS-232 signals to balanced RS-422/485 signals at baud rates up to 115.2 kbps. Configuration is made via a 12-position DIP switch on the bottom of the converter.
Featuring Automatic Send Data Control circuitry, the converter does not require special software control of handshake signals in RS-485 mode. Removable terminal blocks for power and RS-422/485 signals make wiring easy. It is powered by a supply voltage of 10 to 48 VDC which is isolated from all data and signal ground lines.
![ProdGrafik](https://www.sphinxcomputer.de/produktdb/images/products/4491_32942.jpg)
Display
- LED Indicators
Communication and Power
General
- Communication Speed
Serial: From 1,200 to 115.2 k
Connector
RS-232: female DB9
RS-422/485: plug-in screw terminal
Humidity
0 ~ 95%, non-condensing
Interface
RS-232 to RS-422/485
Isolation Protection
2000 VDC
Temperature (Operating)
-40 ~ 80° C (-40 ~ 176° F)
Temperature (Storage)
-40~85°C (40~185 °F)
Power Supply
- Power Requirement
10~48 VDC
![](images/Layout/Weitere-Informationen_weiss.png)