Advantech BB-WSD1XV0
Wireless Mesh 802.15.4e Integrated Accelerometer; Internal Antenna
- Ultra low power 802.15.4e SmartMesh IP technology
- Communicates with Spectre Network Gateway via highly scalable and reliable wireless mesh networks
- Integrated accelerometer
- Wzzard app lets you read or configure the nodes using Android tablets and smart phones
- Rugged, IP66-rated, fiber reinforced polyester PBT enclosure
- MQTT and JSON IoT protocol to application platform
- Class 1 DIV 2 approved for hazardous locations
The Wzzard platform uses mesh networking and time-synchronized channel hopping to provide up to 99.999% connectivity, even in the most demanding RF environments. New nodes may be added at any time, and the SmartMesh IP network will dynamically self-configure as new nodes are added or removed. This is a function of the mesh network itself, and does not need to be controlled by the network gateway.
SPECIFICATIONS
POWER
- Internal
(2) 3.6V 2400 mAH Lithium Thionyl Chloride AA batteries
Battery Life
Multiyear based on 1 min sensor sampling and reporting
Optional External Input Voltage
3.3 VDC +/- 5%
MECHANICAL
- Physical Connection
M12 Connector
1/2” (12.7 mm) Conduit, sensor interface cable included; 8 wire, 26 gage, 6 ft. (1.8 m)
Sensor Inputs
Analog Input (0 - 5 VDC, 0 – 20 mA, 4 – 20 mA)
Digital Input (0-48 VDC)
Digital Input Frequency 1-1K Hz (Accuracy + or – 1 Hz)
Digital Input Counter
Integrated Accelerometer 3 Axis
Integrated Temperature
Thermocouple J, K Type
Digital Output (0-30 VDC)
Optional External Antenna
RP-SMA, Omnidirectional, 3.8 dBi, 2.4 GHz
Dimensions 7.64 inches (194 mm)
Mounting
Magnetic mounting via internal magnet
Pull force 4.7 lbs (2.13 kg)
(4) Mounting ears, M5 (#10)
Enclosure
IP66-rated, fiber reinforced polyester PBT
Weight
0.75 lbs (0.34 kg)
TECHNOLOGY
- Wireless
802.15.4e, SmartMesh IP
Protocols
MQTT-SN, MQTT, JSON
Bluetooth
Bluetooth 4.0 Low Energy (LE)
LED
Network Connectivity
ENVIRONMENTAL
- Installation
Indoor or outdoor
Operating Temperature
-40 to 80°C (-40 to 176°F)
Storage Temperature
-40 to 85°C
Operating Humidity
0 to 95% Non-condensing
WIRELESS SECURITY
- Device Authentication
128 bit AES-based encryption with multiple keys
Message integrity check (MIC)
Synchronized key changeovers
Customized key rotation
SENSOR INTERFACE SPECIFICATIONS
DIGITAL INPUTS
- Voltage range
0 – 48 VDC
V IL
0.97 V Maximum
V IH
1.8 V Minimum
Pull up current
32uA
Type
Sourcing (PNP)/Sinking (NPN) Software selectable input
Isolation
None
RATE/FREQUENCY INPUTS
- Frequency
Does a 1 second measurement at each measurement/publish interval
Digital Input Frequency 1-1K Hz (Accuracy + or – 1 Hz)
Uses the falling edge or rising edge based on the Invert Enabled setting
COUNTER INPUT
- Channels
Actively counts either the falling edge (Invert enabled) or rising edge (Invert disabled)
Can use a multiplier to convert to a unit type or count
2 selectable/shared with Digital inputs
Rolls over at 999999.9
ANALOG INPUTS
- Input ranges
0 - 5 VDC, 0 – 20 mA, 4 – 20 mA
Resolution
12 bit
Input load resistance
100 Mega ohm (0-5VDC), 250 ohm (0 - 20 ma)
Accuracy
Voltage: 0.10% of full scale reading, 0.20% max.
Current: 0.11% of full scale reading, 0.24% max.
THERMOCOUPLE INPUT
- Types Supported
J and K
Ranges Supported
Type J -210 to +1,200 °C
Type K -270 to +1,372 °C
Resolution
0.25 °C
Accuracy
Typical +/- 2 °C
+/- 6 °C over the temperature range of -40 to 80 °C
DIGITAL OUTPUTS
- Voltage range
0 - 30 VDC
Output Type
Open Drain
Output Current
Not to be less than 100ma
Protection
Current Limit Protection
Isolation
None
Kunder, der kiggede på dette produkt, kiggede også på