Advantech Conel BB-SR30308320-SWH

SPHINX i Europa
DK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgrupper > Router > Advantech Conel BB-SR30308320-SWH

Advantech Conel BB-SR30308320-SWH

SmartMotion LTE Router

Advantech Conel BB-SR30308320-SWH
4640_10226.jpg
4640_10227.png
4640_10228.png
  • egenskaberegenskaber
  • beskrivelsebeskrivelse
  • yderligere informationyderligere information
  • PDFPDF
  • Two Independent cellular modules for advanced fail over feature
  • Powerful CPU and enhanced memory to support high demand customer applications
  • Load Balancing
  • Extended operational temperature range from -40 °C to +75 °C
  • 10-60 VDC operated with transient and reverse polarity voltage protection
  • GPS and GLONASS support
  • Low power consumption mode for solar and battery power applications
  • PoE PD, PoE PSE, In/Out, USB Host, MicroSD card holder
  • Advanced security features
The SmartMotion TM cellular router provides a reliable, secure network, with failover protection for devices and LANs. Two interdependent cellular modules with 2 SIMs slots each to support multiple cellular carriers. Business continuity is never a problem with this advanced fail over architecture and Load Balancing feature which simultaneously receives Cellular, WiFi and Ethernet data.

SmartMotion TM automatic wireless failover protects against loss of communications in wired or wireless networks by using dual LTE/4G cellular module technology that accommodates multiple cellular carriers. Smartmotion provides transfer speeds up to 50 Mbit/s and download speeds of up to 100 Mbit/s meeting the high demand required for video transfer.

The SmartMotion TM is designed and tested to meet the requirements of industrial, mobile, security and other harsh environ- ment application where standard commercial designs fail. Specifications include wide operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module), input voltage range 10 V DC to 60 V DC, and advanced sleep mode feature to allow low power consumption for solar and battery power applications.

The SmartMotion TM places intelligence out at the network edge with an extremely powerful CPU and enhanced embedded memory capacity providing full support for LTE/4G (long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage the SmartMotion TM from remote locations.

The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and they can create multiple configurations for the same router. Users may switch from one configuration to another at any time.

The flexible SmartMotion TM concept includes 2 Ethernet ports with 2 independent LANs/IP addresses. The standard configuration also includes 1 USB host port, 1 microSD card holder, 4 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module).

The SmartMotion TM supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numer -ous other functions, as well as additional software like SmartWorx HUB, SmartCluster VPN Server and R-SeeNet.

ProdGrafik

TECHNICAL SPECIFICATION


Power, Consumption, Environmental, IP cover

    Power supply
    10 – 60 VDC (2–Way Molex connector)

    Power consumption – Idle / Average / Peak / Sleep Mode
    2.5 W / 4W / 11 W / 10 mW

    Temperature range – Operating / Storage
    -40 to +75 °C / -40 to +85 °C

    Temperature range LTE450 – Operating / Storage
    -20 to +60 °C / -40 to +85 °C

    Humidity – Operating / Storage (non condensing)
    0 to 95 % / 0 to 95 %

    Cold Start
    -35 °C

    Operating Altitude
    2000 m / 70 kPa

    Ingress Protection Rating
    IP30



Cellular module parameters

       ST352 (ST355)  ST355 – LTE450 module
     LTE  Bit rate 100 Mbps (DL) / 50 Mbps (UL)
     3GPP release 8 compliant
     Supported frequencies:
     800 / 900 / 1800 / 2100 / 2600 MHz
     Bit rate 100 Mbps (DL) / 50 Mbps (UL)
     3GPP release 9 compliant
     Supported frequencies:
     450 / 800 / 1800 / 2600 MHz
     WCDMA  Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL)
     Supported frequencies: 900 / 2100 MHz
     Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL)
     Supported frequencies: 900 / 2100 MHz
     GPRS/EDGE  Bit rate 237 kbps (DL) / 59.2 kbps (UL)
     Supported frequencies: 900 / 1800 / 1900 MHz
     Bit rate 236 kbps (DL) / 59.2 kbps (UL)
     Supported frequencies: 900 / 1800 MHz



WiFi - 802.11 a/b/g/n, AP or Client modes

    Supported WiFi band
    2.4 GHz, 5.4 GHz

    Number of clients:
    10

    Encryption:
    None, WEP, TKIP, AES

    Authentication:
    Open, Shared, WPA–PSK, WPA2–PSK

    5 GHz supported channels
    36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165

    2.4 GHz supported channels
    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14



INDUSTRIY CERTIFICATIONS & APPROVALS

    Radio for general LTE
    ETSI EN 301 511 v9.0.2, ETSI EN 301 908–1 v5.2.1, ETSI EN 301 908-2 v5.2.1, ETSI EN 301 908-13 v5.2.1

    Radio for LTE450
    ETSI EN 301 908-1 v6.2.1, ETSI EN 301 908-13 v6.2.1, ETSI EN 301 489-24 v1.5.1

    Emissions/ Immunity
    IEC 61000-6-2:2005, ETSI EN 301 489-1 v1.9.2, EN 55022:2010

    Safety
    EN 60950-1:06 ed.2 (not Hazardous Locations), EN 62311:2008

    Vehicle
    E8

    Environmental
    RoHS, RoHS2, REACH, WEEE



Mechanical

    Metal case with metal DIN rail
    SIMs for secondary module are covered

    Enclosure Dimensions
    55x97x125 mm (150 mm including wall month sides)

    Weight
    420 g



Features

    Network and Routing
    DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging

    Security
    HTTPS, SSH, VPN tunnels, SFTP
    Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)

    VPN tunnelling
    Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN
    IPSec with IKEv1 and IKEv2

    Configuration Firmware Management
    Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server
    Backup configuration, Restore configuration
    Automatic firmware update from server, Locally via LAN and USB or remotely OTA (HTTP, HTTPS),
    Over-the-Air software updates, Over-the-Air cellular module update from FW

    Diagnostic
    One CLICK report – current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via SSH

    Status
    Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days

    Log
    System Log, Reboot Log, Kernel Log

    Controling and diagnostic
    SMS, SNMP v1/v2c/v3, Statuses, Log

    Event Engine
    StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature.
    Report Types: RAP, SMS, email, SNMP Trap, TCP (csv, xml, binary)

    Support and Warranty
    3 years warranty, Free device software upgrades, Optional warranty extension

    Other
    Support of IPv6



Ports, LED, Antennas

    2x ETH
    RJ45, 10/100 Mbps, 1.5 kV RMS

    SIM
    4 Mini SIMs (2FF) (rear panel)

    LED Indicators
    PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT

    5x ANT - 2x ANT, 2x DIV, GPS
    SMA connectors

    WiFi antenna - *optional
    R-SMA connector

    USB
    USB Host connector 2.0

    I/O
    6-Way Molex connector - 2x binary input, 1x binary output

    SD Card
    1x Micro SD Card slot (rear panel)

    RST
    RESET button



Cellular module parameters

     PoE Parameters  PoE PD  PoE PSE
     Input voltage range  42.5 – 57 V  44 – 57 V, 65 W
     Power available  25.50 W  2x 25.50 W (ETH0, ETH1)
     Maximum current  600 mA  
     Insul. Strenght  1.5 kV from the router  none

    Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector.



Kunder, der kiggede på dette produkt, kiggede også på
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.