Advantech BB-105FX-POE

The N-TRON® 105FX-POE Unmanaged Industrial Ethernet Switch is designed to transmit power along with data over an Ethernet network. It is ideal for PoE capable devices where running an AC power feed is either not possible or cost effective. This allows an end user to power a PoE camera, wireless access point, or any other PoE capable device without the need for running separate wires for power. This also makes it possible to utilize a centralized battery backup for all these devices.


PRODUCT OVERVIEW

The 105FX-POE Industrial Network Switch is designed to meet the most demanding industrial communications requirements by providing high throughput and minimum downtime while also providing power to PoE capable devices over the Ethernet network.

The 105FX-POE provides four RJ-45 auto sensing10/100BaseTX ports. All ports are full/half duplex capable, using "state of the art" Ethernet switching technology. All four RJ-45 ports also act as PoE ports allowing power to pass through four of the eight strands of CAT5 cable. Each PoE port supports up to 15.4 watts of power. The 5th port is a 100BaseFX fiber optic uplink utilizing industry standard ST or SC duplex connectors.

The 105FX-POE auto-negotiates the speed and flow control capabilities of the four TX port connections, and configures itself automatically.

The N-TRON 105FX-POE also supports up to 2,000 MAC addresses, enabling these products to support extremely sophisticated and complex network architectures.

The 105FX-POE automatically detects any PoE device that is connected and powers it accordingly. If a PoE fault is detected on a specific port the Auto-disconnect feature disables PoE power on that port, allowing only data communications to pass, reducing the risk of damaging costly equipment.

The 105FX-POE is an ideal candidate for providing data and power to wireless LAN access points, network cameras, VoIP, and other PoE capable devices. The product also helps reduce costs by eliminating the need for electrical wiring and electrician expenses.

The 105FX-POE has extended operating environmental specifications to meet the harsh needs of the industrial environment. For cost savings and convenience the network switch can be DIN-Rail mounted alongside Ethernet I/O or other Industrial Equipment.

To increase reliability the 105FX-POE provides dual redundant power inputs. Two power LED's are also provided on this unit indicating a valid power source on both the redundant power inputs and also indicating when a power fault bus occurs.

BENEFITS

PoE Industrial Network Switch
• Compact Size / Small Footprint
• Ability to Power Devices via LAN
• Eliminates need for Costly Electrical Wiring
• Extended Environmental Specifi cations
• Hardened Metal DIN-Rail Enclosure
• High Performance
• High MTBF >2M Hours
• ESD Protection Diodes on RJ-45 Ports
• Surge Protection Diodes on Power Inputs


Ease of Use


• Plug & Play Operation
• Auto Sensing 10/100BaseTX
• Auto Sensing Full/Half Duplex
• MDIX Auto Cable Sensing
• Unmanaged Operation
• Auto-Detection of PoE Capable Devices
• Redundant Power Status LED's


Increased Performance


• Full Wire Speed Capable
• Full Duplex Capable
• Eliminates Network Collisions
• Increases Network Determinism
• Auto-Disconnect of PoE Port if Fault is Detected

BB-105FX-POE SPECIFICATIONS

Case Dimensions
Height:	3.5" (9.7cm)
Width:	1.5" (3.8 cm)
Depth	3.6" (9.0cm)
Weight:	0.7 lbs. (0.3 kg)
DIN-Rail:	35mm
Electrical
Input Voltage:	46-49 VDC
Steady Input Current	1.6 A@48V Under Full Load
Steady Input Current with	65mA@48V No PoE, Switch Full Load
Inrush:	26Amp/1.3ms@48V
Environmental
Operating Temperature:	-40 oC to 85 oC
Storage Temperature:	-40 oC to 85 oC
Operating Humidity:	10% to 95% (Non Condensing)
Operating Altitude:	0 to 10,000 ft.
Network Media
10BaseT:	>Cat3 Cable
100BaseTX:	>Cat5 Cable
100BaseFX    Multimode:    Singlemode:	50-62.5/125 μm 7-10/125 μm
Connectors
10/100BaseTX+PoE:	Four (4) RJ-45 TX/PoE Copper Ports
100BaseFX:	One (1) ST or SC Duplex Port
Recommended Wiring Clearance
Front:	4" (10.16 cm)
Top:	1" (2.54 cm)
Regulatory Approvals
	FCC Title 47 Part 15 Class A ICES-003- Class A CE: EN61000-6-2,4; EN61000-4-2,3,4,5,6 EN55011 UL Listed (US and Canada) per ANSI/ISA-12.12.01-2000, Class I, Div 2, Groups A,B,C,D,T4A; ABS Type Approval for Shipboard Applications DNV Type Approval Certification EN50155 for Railway Applications GOST-R Certified; RoHS Compliant
Designed to comply with:	IEEE 1613 for Electric Utility Substations NEMA TS1/TS2 for Traffic Control

Ordering Information

Available Modules
BB-105FX-SC-POE	5-P,4-10/100TXPOE,1-100BASEFXU,DIN,MM,SC
BB-105FX-ST-POE	5-P,4-10/100TXPOE,1-100BASEFXU,DIN,MM,ST