Advantech BB-B-XC-232
Expansion board for v2 routers - RS232
egenskaber
beskrivelse
yderligere information
lignende produkter
udskriv denne side
føj til notater
vis mine notater
PDF
egenskaber
beskrivelse
yderligere information
PDF
- RS232
- Port 1 or Port 2
- Only for LR2F routers
RS232 expansion port can be fitted to both of ports – PORT1 and PORT2.
This port is designed as an expansion board that allows to use of additional hardware interface for Advantech B+B SmartWorx routers and modems. This interface is physical connected on RJ45 connector on an appropriate router (or a modem). The expansion port RS232 is internal supplied from an appropriate router. RS232 converter is protected against overload the bus.
This port is designed as an expansion board that allows to use of additional hardware interface for Advantech B+B SmartWorx routers and modems. This interface is physical connected on RJ45 connector on an appropriate router (or a modem). The expansion port RS232 is internal supplied from an appropriate router. RS232 converter is protected against overload the bus.
SPECIFICATIONS
| Expansion port RS232 | ||
| Power supply | Internal | +3,3 V |
| Environment | Operating temperature Storage temperature | -30 to +60◦C -30 to +85◦C |
| Standards | Emission Immunity Safety Isolation | EN 55022/B ETS 300 342 EN 60950 EN 60747 |
| RS232 specifications (EN 1434) | Max. operating bus current Max. data rate Max. overvoltage Max. total cable length (300 Bd, 200nF/km) | 15 mA 230400 bps ±30 V 20 m |
Order Information
| Available Module | |
| BB-B-XC-232 | Expansion board for v2 routers - RS232 |
Kunder, der kiggede på dette produkt, kiggede også på