Advantech BB-B-XC-ETH
Expansion board for v2 routers - 3x ETH port
egenskaber
beskrivelse
yderligere information
lignende produkter
udskriv denne side
føj til notater
vis mine notater
PDF
egenskaber
beskrivelse
yderligere information
PDF
- 2x ETHERNET 10/100
- Port 1 or Port 2
- Only for LR2F routers
- Provide 3x ETH Swich
The expansion port ETH is created as expansion port which enables to use of the next hardware interface of Advantech B+B SmartWorx routers and modems for next signal pro- cessing. This interface is physically connected on RJ45 connector of the device. The expan- sion port ETH is internally powered from the router. The ETH port is protected against bus overload.
Expansion port ETH can be fitted only into PORT1 position.
SPECIFICATIONS
| Expansion port CNT | ||
| Power supply | Internal | +3,3 V |
| Environment | Operating temperature Storage temperature | -30 to +60◦C -30 to +85◦C |
| Standards | Emission Immunity Safety | EN 55022/B ETS 300 342 EN 60950 |
| Ethernet (IEEE 802.3) | Max. bit rate Max. total cable length (300Bd, 200nF/km) | 100 Mbps 100 m |
Order Information
| Available Module | |
| BB-B-XC-ETH | Expansion board for v2 routers - 3x ETH port (I/O) |
Kunder, der kiggede på dette produkt, kiggede også på