Advantech BB-SDR-480P-24
480W Single Output Industrial DIN RAIL Power Supply with PFC and Parallel Function
egenskaber
beskrivelse
yderligere information
lignende produkter
udskriv denne side
føj til notater
vis mine notater
PDF
egenskaber
beskrivelse
yderligere information
PDF
- Parallel function (7+1)
- Input voltage: 127 - 370 VDC, 90 - 264 VAC (47 – 63 Hz)
- 80A input inrush current, max.
- 80A input inrush current, max.
- 720W peak power (3 seconds)
- 0.6 mA leakage current, max.
- + 15% over-load adjustment
- 110 - 150% over-load protection
- I/P-O/P, withstand voltage: 3000 VAC
- I/P-FG, withstand voltage: 2000 VAC
- O/P-FG, withstand voltage: 500 VAC
- Operating temperature: -25 - +70 °C
Model Series SDR-480P power supply is enclose in a DIN rail mountable case with touch-guard screw terminals and features universal input, single output, power-on LED display, built-in active PFC function, DC OK relay contact and peak load capability. The power supply protects against short circuit, overvoltage and overload by current limiting (hiccup after 3s).
Model SDR-480P-24 also supports parallel function.
SPECIFICATIONS
| OUTPUT | ||
| DC VOLTAGE | 24V | |
| RATED CURRENT | 20A | |
| CURRENT RANGE | 0 ~ 20A | |
| RATED POWER | 480W | |
| PEAK CURRENT | 30A | |
| PEAK POWER | 720 W (3 sec.) | |
| RIPPLE & NOISE (max.) | 100mVp-p | |
| VOLTAGE ADJ. RANGE | 24 ~ 28V | |
| VOLTAGE TOLERANCE | ± 1.20% | |
| LINE REGULATION | ± 0.5% | |
| LOAD REGULATION | ± 1.0% | |
| SETUP, RISE TIME | 1500ms, 150ms/230VAC 3000ms, 150ms/115VAC at full load | |
| HOLD UP TIME (Typ.) | 14ms/230VAC at full load | |
| INPUT | ||
| VOLTAGE RANGE | 90 ~ 264VAC 127 ~ 370VDC | |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| POWER FACTOR (Typ.) | 0.94/230VAC 0.99/115VAC at full load | |
| EFFICIENCY (Typ.) | 94% | |
| AC CURRENT (Typ.) | 5 A/115VAC 2.5 A/230VAC | |
| INRUSH CURRENT (Typ.) | 40A/115VAC 80A/230VAC | |
| LEAKAGE CURRENT | <0.6mA / 240VAC | |
| PROTECTION | ||
| OVERLOAD | Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage with auto-recovery | |
| >150% rated power, constant current limiting with auto-recovery within 2 seconds and shut down o/p voltage after 2 seconds | ||
| OVER VOLTAGE | 29 ~ 33V | |
| Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery | ||
| OVER TEMPERATURE | 105 °C ±5°C (TSW: detect on heatsink of power switch) | |
| Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||
| FUNCTION | ||
| DC OK REALY CONTACT RATINGS (max.) | 60Vdc/0.3A, 30Vdc/1A, 30Vac/0.5A resistive load | |
| ENVIRONMENT | ||
| WORKING TEMP. | -25 ~ +70°C (Refer to "Derating Curve") | |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40 ~ +85°C, 10 ~ 95% RH | |
| TEMP. COEFFICIENT | ± 0.03%/°C (0 ~ 50°C) | |
| VIBRATION | Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 | |
| SAFETY & EMC | ||
| SAFETY STANDARDS | Ul508, TUV EN60950-1 approved;(meet EN60204-1) | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25°C/ 70% RH | |
| EMC EMISSION | Compliance to EN55011, EN55022 (CISPR22), EN61204-3 Class B, EN61000-3-2,-3 | |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), EN61204-3, heavy industry level, criteria A,SEMI F47, GL approved | |
| OTHERS | ||
| MTBF | 112.9K hrs min. MIL-HDBK-217F (25°C) | |
| DIMENSION | 85.5*125.2*128.5mm (W*H*D) | |
| PACKING | 1.6Kg; 8pcs/13.8Kg/0.9CUFT | |
Ordering Information
| Available Modules | |
| BB-SDR-480P-24 | 480W, 24VDC, 20A, AC-DC Industrial DIN Power Supply, Ultra Slim Metal Case, Parallel Function |
Kunder, der kiggede på dette produkt, kiggede også på