Advantech BB Smart Flex SR306

SPHINX i Europa »  ch es uk fr de at it nl be se  «
Phone: +45 (0) 8699 7996 |  Juridisk meddelelse |  Kontakt |  KVM Shop

Du er her » Advantech BB Smart Flex SR306 «

Advantech BB Smart Flex SR306




SmartFlexTM cellular router provides secure Internet connectivity for devices and LANs via the cellular networks. It canprovide automatic wireless failover for wired networks, wireless connectivity for devices in remote locations where cable connections are impractical and wireless connectivity for mobile assets. With upload speeds of up to 50 Mbps and download speeds of up to 100 Mbps, SmartFlex provides ample bandwidth, even for applications that require video.

SmartFlex places intelligence at the network edge with an extremely powerful Cortex A8 CPU at 1GHz, 256 MB flash memory, 512 MB RAM and 128kB M-RAM, providing full support for LTE (Long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage SmartFlex from remote locations. The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and can create multiple configurations for the same router and switch from one configuration to another at any time. Modular SmartFlex can be configured for any application. Standard configuration includes 2 Ethernet ports with 2 independent LANs/IP addresses and also includes 1 USB host port, 1 microSD card holder, 2 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O), 1 binary output (I/O) and onboard GPS.

An optional built-in Wi-Fi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module). Further optional boards include: 3x ETH (the router can be configured with up to 5 total Ethernet ports and 3 independent LANs/IP addresses) or ETH/ RS-232/485 or RS-232/485 (isolation strength up to 2.5kV) or RS-232. The SmartFlex supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartCluster VPN Server and R-SeeNet.


yderligere information


Power Supply
(sold separately)
10 – 60 VDC (2–Way Molex connector
Power Consumption Idle: 2.5 W
Average: 4 W
Peak: 11 W
Sleep Mode: 10mW

Temperature Range Operating: -40 to +75 °C
Storage: -40 to +85 °C
Temperature Range
Operating: -20 to +60 °C
Storage: -40 to +85 °C
Humidity Operating: 0 to 95 %
Storage (Non-condensing): 0 to 95 %
Cold Start -35 °C
Operating Altitude 2000 m / 70 kPa
Ingress Protection Rating IP30

Plastic or metal case with plastic or metal DIN rail
Enclosure Dimensions 55x97x125 mm
Weight Plastic 170 g
Weight Metal 375 g

Supported Wi-Fi band 2.4 GHz, 5.4 GHz
Encryption None, WEP, TKIP, AES
5 GHz supported channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
2.4 GHz supported channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
Number of clients 10
Authentication Open, Shared, WPA–PSK, WPA2–PSK

parameters for opposite PSE
Input voltage range 42.5 – 57 V 44 – 57 V, 65 W
Power available 25.50 W 2x 25.50 W
(ETH0, ETH1)
Maximum current 600 mA
Insul. Strength 1.5 kV from the router none
Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector

LTE parameters Bit rate 100 Mbps (DL) / 50 Mbps (UL)
3GPP rel. 9 standard
Supported bandwidths: 5 Mhz, 10 Mhz, 20 Mhz
Supported frequencies: 800 / 900 / 1800 / 2100 / 2600 MHz
HSPA+ parameters Bit rate 42 Mbps (DL) / 5,76 Mbps (UL)
UE CAT. 24, 6
3GPP rel. 5, 6, 7, 8 standard
Supported frequencies: 850 / 900 / 1900 / 2100 MHz
UMTS parameters PS bit rate 384 kbps (DL) / 384 kbps (UL)
3GPP rel. 5, 6, 7, 8 standard
W-CDMA FDD standard
Supported frequencies: 850 / 900 / 1900 / 2100 MHz
GPRS/EDGE parameters Data throughput max. 236 kbps
3GPP rel. 99 standard
GPRS multislot class 10
EDGE multislot class 12
Coding schemes CS 1 to 4, MCS 1 to 9
Supported frequencies: 850 / 900 / 1800 / 1900 MHz
GPRS/EDGE power classes GSM 850 CS: Class 4 (32 dBm)
EGSM 900 CS: Class E2 (27 dBm)
DCS 1800 CS: Class 1 (29 dBm)
PCS 1900 CS: Class E2 (26 dBm)

Radio ETSI EN 301 511 V9.0.2, ETSI EN 301 908-2 V11.1.1, ETSI EN 301 908-13 V11.1.1, ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1
EMC ETSI EN 301 489-1 v1.9.2, ETSI EN 301 489-1 V2.1.1, ETSI EN 301 489-17 V3.1.1
Safety EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 + AC:2011 EN 62311:2008
Vehicle E-Mark homologation number: 10R – 04 7737

Antenna 50 Ohms – active
Protocols NMEA 0183 v3.0
Frequency GPS 1575.42MHz Typical
Sensitivity Tracking: -161dBm
Acquisition (Assisted): -158dBm
Acquisition (Standalone): -145dBm
Acquisition time Hot start: 1 s
Warm start: 29 s
Cold start: 32 s
Accuracy Horizontal: < 2m (50 %); < 5m (90 %)
Altitude: < 4m (50 %); < 8m (90 %)
Velocity: < 0.2mps

Network and Routing DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging
Security HTTPS, SSH, VPN tunnels, SFTP, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)
VPN Tunnelling Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN, IPSec with IKEv1 and IKEv2
Configuration Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server Backup configuration, Restore configuration
Firmware Management Automatic firmware update from server, Locally via LAN and USB or remotely OTA (HTTP, HTTPS), Over-the-Air software updates, Over-the-Air cellular module update from FW
Diagnostic One CLICK report – current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via SSH
Status Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days
Log System Log, Reboot Log, Kernel Log
Controlling and Diagnostic SMS, SNMP v1/v2c/v3, Statuses, Log
Event Engine StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature Report Types: RAP, SMS, email, SNMP Trap
Other IPv6 support

Ordering Information

Available Modules
BB-SR30600021 SmartFlex, EMEA/LATAM/APAC, 2x ETH, Metal, ACC EU
BB-SR30600110 SmartFlex, EMEA/LATAM/APAC, 5x ETH, Plastic, No ACC
BB-SR30600121 SmartFlex, EMEA/LATAM/APAC, 5x ETH, Metal, ACC EU
BB-SR30600125 SmartFlex, EMEA/LATAM/APAC, 5x ETH, Metal, ACC Int.
BB-SR30600415 SmartFlex, EMEA/LATAM/APAC, 3x ETH, 1x RS232, 1x RS485, Plastic, ACC Int.
BB-SR30600421 SmartFlex, EMEA/LATAM/APAC, 3x ETH, 1x RS232, 1x RS485, Metal, ACC EU
BB-SR30610025 SmartFlex, EMEA/LATAM/APAC, 2x ETH, WIFI, Metal, ACC Int.
BB-SR30610125 SmartFlex, EMEA/LATAM/APAC, 5x ETH, WIFI, Metal, ACC Int.
BB-SR30610310 SmartFlex, EMEA/LATAM/APAC, 2x ETH, 1x RS232, 1x RS485, WIFI, Plastic, No ACC
BB-SR30610325-SWH SmartFlex, EMEA/LATAM/APAC, 2x ETH, 1x RS232, 1x RS485, WIFI, Metal, ACC Int.


PDF beskrivelse Advantech BB Smart Flex SR306 Datasheet (606.9 kB)

Copyright © 2013 SPHINX Computer Vertriebs-GmbH

Vilkår Fortrolighedspolitik toppen af siden Cookie direktiv Steder Om os


This website uses cookies, Google Adwords and Google Analytics. More information