HW group Temp-485-Pt100 Cable3
temperature probe with a RS-485 converter
egenskaber
beskrivelse
lignende produkter
udskriv denne side
føj til notater
vis mine notater
PDF
egenskaber
beskrivelse
PDF
- Environment: Indoor or outdooor use - IP65,wall mount
- Supplied probe: External Pt100 temperature probe (stainless stell housing, 2m cable)
- External probe measured temperature range: -50°C to +200°C (-58°F to +390°F)
- Operating Temperature: The converter works from -30 to +70°C (-22 to 160°F)
- Interface: RS-485, terminals
- Power supply: From the Poseidon (12V) or 10..35VDC
Applications and usage:
Typical applications include measuring temperature in places that can be flooded with water, or an environment wit moisture
condensation.
The temperature probe is separated form the converter to enable a wider range of measure temperature and easier installation
in certain applications.
-Measuring element on the cable: Pt100/A, IP67 protection
-Cable 2m, shielded silicone
-Rod length: 50 mm
-Probe connection: 4-wire
-Enclosure Material: 17240 stainless steel
-Converter ext. dimensions: 62 x 95 x 35 mm
-Supply Voltage: 10 to 35 VDC (protected against polarity reversal)
-Consumption while measuring: typ. 2mA
-Consumption during RS-485 transmission: typ. 60mA
-Wire connection: CUU 2.5mm2 terminals
RS-485 Bus
-Communication: ASCII (9600Bd 8N1)
-Address Configuration: sfotware configuration or jumpers
-Termination: Can be enabled with a DIP switch
Solutions
Industrial Applications
Technical Information
Measurement
Power and Dimensions
Power Supply: Terminal Block
Type
Devices
Monitoring
Typical applications include measuring temperature in places that can be flooded with water, or an environment wit moisture
condensation.
The temperature probe is separated form the converter to enable a wider range of measure temperature and easier installation
in certain applications.
-Measuring element on the cable: Pt100/A, IP67 protection
-Cable 2m, shielded silicone
-Rod length: 50 mm
-Probe connection: 4-wire
-Enclosure Material: 17240 stainless steel
-Converter ext. dimensions: 62 x 95 x 35 mm
-Supply Voltage: 10 to 35 VDC (protected against polarity reversal)
-Consumption while measuring: typ. 2mA
-Consumption during RS-485 transmission: typ. 60mA
-Wire connection: CUU 2.5mm2 terminals
RS-485 Bus
-Communication: ASCII (9600Bd 8N1)
-Address Configuration: sfotware configuration or jumpers
-Termination: Can be enabled with a DIP switch
Solutions
Industrial Applications
- Industrial Site temperature monitoring
Technical Information
Measurement
| Measure | Range | Accuracy | Resolution | Technology |
| Temperature | -50~200°C | ± (0.25 + 0.002t) | 0.10 | Pt100/PT1000 |
| Cable length: 2 meter |
| Galvanic Isolation: No |
| Units Converter: No |
| Calibrated Points: No |
| Number of values provided: 1 |
Power Supply: Terminal Block
| Power Supply: 12-24V |
| Consumption: 50mA |
| Operating Environment: -30°C - 70°C / 0%RH - 100%RH |
| Storage Environment: -30°C - 60°C / 5%RH - 95%RH |
| Dimensions: 114 x 65 x 35 (WxHxD) / 181g |
| Warranty: 24 months |
| Environment: Industrial |
| Installation: Wall |
| Protection: IP53 |
| Connectors: RJ12 |
Devices
Monitoring
- Poseidon2 4002
Kunder, der kiggede på dette produkt, kiggede også på