Advantech BB-ESR902

Description Industrial and commercial measurement and control systems often have standalone devices with unused serial ports. B B SmartWorx ESRx Serial Servers allow you to connect those ports into your existing LAN or WAN, giving you access to more information and the ability to configure, manage and troubleshoot those devices from a control room, office or a distant location via a WAN. Save the cost, time and trouble of carrying a laptop out to devices located in distant, cold, dirty or uncomfortable environments. ESRx Serial Servers are built for industrial environments, featuring an IP30 approved, slim line, DIN rail mountable case. They operate from a range of voltages using AC or DC power, feature terminal block power connectors and even support redundant DC power. An external power source is required (not included, sold separately). Connect a serial device to the ESRx’s serial port and connect the ESRx to your LAN. Your networked computer ‘sees’ the device over the network as a virtual serial connection. ESRx serial servers support TCP or UDP protocols and allow transmit-to and receive-from multiple IP addresses. There are four methods of configuration: Vlinx Management Software, Web Server, Telnet, or a direct RS-232 console connection using a terminal program. Operation(See operating manual for more details.)
ESRx serial servers can be accessed and configured from any web browser (ie, Internet Explorer) on the LAN/WAN allowing you to remotely manage the software and your serial device and do off-site troubleshooting. Vlinx ESRx Serial Servers provide automatic resumption of the TCP data connection in case of a power failure or loss of an Ethernet connection on either the client or server. Once the Heartbeat connection is established, the server sends a signal to the client every five seconds until communication is re-established. Without this feature, a device that loses a connection and stops communicating would not be able to reconnect without a person physically attending to the problem. The Heartbeat feature works with virtual COM and TCP direct IP connections.Vlinx Manager Software allows easy access to the serial server to configure the server and its ports, upgrade firmware and monitor port status and activity. When the Vlinx Manager opens, it will search for and display all serial servers on the network. The Monitor Port feature allows you to use any PC on the LAN/WAN to actively view and troubleshoot the communications status. It shows when there is a client connection to the server and the client IP address. It displays the number of bytes transmitted and received, as well as the status of the hardware handshaking lines.

Specifications

Serial Technology
Note: refer to user manual for detailed information on pin-outs and signals.


Serial Interfaces
RS-232 (DTE), RS-422, RS-485 (2-wire / 4-wire)

Serial Connectors
BB-ESR901: TB and DB9 M (selectable)
BB-ESR902: 2x DB9 M
BB-ESR904: 4x DB9 M

Baud Rate
110 to 230.4 Kbps

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Serial Buffer
8 Kb per port



Ethernet Technology


Connector
RJ45 F

Data Rate
10/100 Mbps auto-detecting 10BaseT or 1000BaseTx

Protocols
TCP, IP, ARP, DHCP, Telnet, HTTP, UDP, ICMP



Configuration


Console
RS-232 w/ VT100 Emulation

Telnet
HyperTerminal w/VT100 Emulation

Vlinx™ Manager
Windows 7, 10

HTTP
Embedded web page



Power


Source
External power supply (not included, sold separately)

Voltage
9 to 48 Vdc, or 8 to 24 Vac

Consumption
BB-ESR901: 320 mA @ 12 Vdc
BB-ESR902: 340 mA @ 12 Vdc
BB-ESR904: 326 mA @ 12 Vdc

Connector
Removeable terminal block (12 to 28 AWG)



Environmental


Operating Temperature
-10 to +80 °C

Storage Temperature
-20 to +85 °C

Operating Humidity
5 to 95%, non-condensing



Mechanical


Enclosure
IP30

Dimensions
BB-ESR901/902: 4.46 x 15.52 x 10.46 cm
BB-ESR904: 4.46 x 18.03 x 10.46 cm



Meantime Between Failures (MTBF)


MTBF
BB-ESR904 = 96827.27 hours

Calculation Method
MIL217F Parts Count Reliability Prediction



Regulatory – Approvals / Standards / Directives


FCC
EU Declaraction of Conformity - Directives
2014/30/EU Electromagnetic Compatibility Directive
2011/65/EU amended by (EU) 2015/863 Reduction of Hazardous Substances Directive (RoHS-10)
2012/19/EU Waste Electrical and Electronic Equipment (WEEE)

EU Declaraction of Conformity - Standards
EMC:
EN 55032:2015 Class B Electromagnetic compatibility of multimedia equipment – Emission requirements
EN 55024:2010 Information Technology Equipment –Immunity Characteristics – Limits and methods of measurement

Ordering Information

Model No.	Serial Ports	Serial Connector	Ethernet Port	Ethernet   Connector
BB-ESR901	1	DB9 or Terminal Block	(1) Copper	RJ45
BB-ESR902	2	DB9	(1) Copper	RJ45
BB-ESR904	4	DB9	(1) Copper	RJ45

Accessories – Sold Separately

BB-MDR-40-12

– Power Supply, 12 Vdc, 40 W, 3.33 A, DIN rail mount, plastic