Moxa PT-G510 Series
IEC 61850-3 10-port Layer 2 full Gigabit PRP/HSR managed Ethernet switches


- IEC 61850-3 Edition 2 Class 2 compliant
- IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
- IEEE 1588 hardware time stamp supported
- Supports IEEE C37.238 and IEC 61850-9-3 power profiles
- GOOSE Check for easy troubleshooting
- Built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA
- -40 to 75°C operating temperature range
The PT-G510 Series is designed to deliver the highest level of system availability and data integrity for mission-critical applications in digital substations that demand zero-recovery-time redundancy.
The PT-G510 Series supports PRP/HSR to achieve seamless redundancy for substations and process automation systems. Hardware-based IEEE 1588v2 PTP is also supported for time-critical applications. Featuring a highly durable design, the PT-G510 Series is certified for IEC 61850-3 Edition 2 Class 2 to fulfill demanding requirements in substation applications.
The PT-G510 Series comes with eight 100/1000BaseT(X) Ethernet ports or 100/1000BaseSFP slots with two dedicated 100/1000BaseSFP PRP/ HSR ports combined with support for a complete redundancy protocol suite including PRP, HSR, MRP, STP, MSTP, and RSTP for maximum network reliability.
The PT-G510 Series further supports GOOSE Check to efficiently monitor GOOSE packets and features a built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA systems.
Specification
Ethernet Interface
- 100/1000BaseT(X) Ports (RJ45 connector):
- PT-G510-8GTX-PHR models: 8
- PT-G510-4GTX4GSFP-PHR models: 4
- 100/1000BaseSFP Ports:
- PT-G510-8GSFP-PHR models: 10
- PT-G510-4GTX4GSFP-PHR models: 6
- Standards:
- IEEE 802.3u for 100BaseT(X) and 100BaseFX
- IEEE 802.3ab for 1000BaseT(X)
- IEEE 802.3z for 1000BaseX
- IEEE 802.1D-2004 for Spanning Tree Protocol
- IEEE 802.1w for Rapid Spanning Tree Protocol
- IEEE 802.1p for Class of Service
- IEEE 802.1Q for VLAN Tagging
- IEEE 802.1X for authentication
- IEEE 802.3ad for Port Trunk with LACP
- IEEE 802.3x for flow control
Ethernet Software Features
- Management:
- HTTPS
- Back Pressure Flow Control
- DHCP Option 66/67/82
- Fiber check
- Flow control
- LLDP
- Port Mirror
- SNMP Inform
- BOOTP
- DHCP Server/Client
- HTTP
- IPv4/IPv6
- RARP
- SMTP
- SNMPv1/v2c/v3
- Syslog
- Telnet
- TFTP
- MIB:
- MIB-II
- Ethernet-like MIB
- Bridge MIB
- P-BRIDGE MIB
- Q-BRIDGE MIB
- RSTP MIB
- RMON MIB Groups 1, 2, 3, 9
- Filter:
- IGMP v1/v2/v3
- GMRP
- GVRP
- 802.1Q
- QinQ VLAN
- Redundancy Protocols:
- Link Aggregation
- MSTP
- RSTP
- STP
- Turbo Chain
- Turbo Ring
- MRP
- HSR
- PRP
- Coupling
- RSTP grouping
- Security:
- RADIUS
- TACACS+
- SSH
- Port Lock
- Broadcast storm protection
- MAB authentication
- Sticky MAC
- Access control list
- Time Management:
- NTP Server/Client
- SNTP
- IEEE 1588v2 PTP (hardware-based)
- Power Substation:
- GOOSE Check
- IEC 61850 QoS
- MMS
Switch Properties
- Priority Queues: 8
- Max. No. of VLANs: 256
- VLAN ID Range: 1 to 4094
- RSTP Grouping ID Range: 1 to 4094
- IGMP Groups: 4096
- MAC Table Size: 16 K
- Packet Buffer Size: 12 Mbits
Serial Interface
- Console Port: RS-232 (RJ45)
USB Interface
- Storage Port: USB Type A
Power Parameters
- Input Voltage:
- HV models: 110-220 VAC, 110-220 VDC (88 to 300 VDC, 85 to 264 VAC)
- WV models: 24-48 VDC (18 to 72 VDC)
- Note: Both -HV and -WV models support dual power inputs with a single power module.
- Input Current:
- HV models: 0.5 A @ 110-220 VAC
0.3 A @ 110-220 VDC - WV models: 1.1 A @ 24-48 VDC
- HV models: 0.5 A @ 110-220 VAC
- Alarm Contact Channels: Resistive load: 1 A @ 24 VDC
- Overload Current Protection: Supported
- Reverse Polarity Protection: Supported
Physical Characteristics
- IP Rating: IP30
- Dimensions (without ears): 74 x 148 x 120 mm (2.91 x 5.83 x 4.72 in)
- Weight 1476 g (3.25 lb)
- Installation DIN-rail mounting
Environmental Limits
- Operating Temperature:
- -40 to 75°C (-40 to 167°F)
- -40 to 85°C (-40 to 185°F) for 16 hrs (tested in accordance with IEC 60068-2-2)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity 5 to 95% (non-condensing)
Standards and Certifications
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A
- EMS:
- IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
- IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
- IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
- IEC 61000-4-6 CS: 10 V
- IEC 61000-4-8 PFMF
- EN 61000-4-11
- Power Substation:
- IEC 61850-3 Edition 2.0 Class 2
- IEEE 1613
- Railway: EN 50121-4
- Maritime: WV models: DNV
IEC 60945 - Safety:
- IEC 62368-1
- UL 62368-1
MTBF
- Time: 688,584 hrs
- Standards: Telcordia (Bellcore) Standard TR/SR
Warranty
- Warranty Period 5 years
- Details See www.moxa.com/warranty
Package Contents
- Device: 1 x PT-G510 Series switch
- Cable: 1 x RJ45-to-DB9 console cable
- Installation Kit:
- 1 x DIN-rail kit
- 1 x cap, for type A USB port
- 6 or 10 x cap, plastic, for SFP port
- Documentation:
- 1 x quick installation guide
- 1 x warranty card
- 1 x substance disclosure table
- 1 x product certificates of quality inspection, Simplified Chinese
- 1 x product notice, Simplified Chinese
- Note: SFP modules need to be purchased separately for use with this product.
Ordering Information
| Model Name | 100/1000BaseT(X) Ports (RJ45 Connector) |
100/ 1000BaseBaseSFP Slots |
Operating Voltage | Conformal Coating | Operating Temp. |
|---|---|---|---|---|---|
| PT-G510-8GSFP-PHR-HV | ? | 10 | 110-220 VDC/VAC | - | -40 to 75°C |
| PT-G510-8GSFP-PHR-WV | - | 10 | 24-48 VDC | - | -40 to 75°C |
| PT-G510-8GTX-PHR-HV | 8 | 2 | 110-220 VDC/VAC | - | -40 to 75°C |
| PT-G510-8GTX-PHR-WV | 8 | 2 | 24-48 VDC | - | -40 to 75°C |
| PT-G510-4GTX4GSFP-PHRHV | 4 | 6 | 110-220 VDC/VAC | - | -40 to 75°C |
| PT-G510-4GTX4GSFP-PHRWV | 4 | 6 | 24-48 VDC | ? | -40 to 75°C |
| PT-G510-8GSFP-PHR-HV-CT | - | 10 | 110-220 VDC/VAC | ✓ | -40 to 75°C |
| PT-G510-8GSFP-PHR-WV-CT | - | 10 | 24-48 VDC | ✓ | -40 to 75°C |
| PT-G510-8GTX-PHR-HV-CT | 8 | 2 | 110-220 VDC/VAC | ✓ | -40 to 75°C |
| PT-G510-8GTX-PHR-WV-CT | 8 | 2 | 24-48 VDC | ✓ | -40 to 75°C |
| PT-G510-4GTX4GSFP-PHRHV-CT | 4 | 6 | 110-220 VDC/VAC | ✓ | -40 to 75°C |
| PT-G510-4GTX4GSFP-PHRWV-CT | 4 | 6 | 24-48 VDC | ✓ | -40 to 75°C |
Accessories (sold separately)
| Software | |
|---|---|
| MXview-50 | MXview license for 50 nodes |
| MXview-100 | MXview license for 100 nodes |
| MXview-250 | MXview license for 250 nodes |
| MXview-500 | MXview license for 500 nodes |
| MXview-1000 | MXview license for 1000 nodes |
| MXview-2000 | MXview license for 2000 nodes |
| MXview Upgrade-50 | MXview license expansion for 50 nodes |
| Storage Kits | |
| ABC-02-USB | Configuration backup and restoration tool, firmware upgrade, and log file storage tool for managed Ethernet switches and routers, 0 to 60°C operating temperature |
| ABC-02-USB-T | Configuration backup and restoration tool, firmware upgrade, and log file storage tool for managed Ethernet switches and routers, -40 to 75°C operating temperature |
| SFP Modules | |
| SFP-1GTXRJ45-T | SFP module with 1 1000BaseT port with RJ45 connector for 100 m transmission, -40 to 75°C operating temperature |
| SFP-1FELLC-T | SFP module with 1 100Base single-mode with LC connector for 80 km transmission, -40 to 85°C > operating temperature |
| SFP-1FEMLC-T | SFP module with 1 100Base multi-mode, LC connector for 2/4 km transmission, -40 to 85°C operating temperature |
| SFP-1FESLC-T | SFP module with 1 100Base single-mode with LC connector for 40 km transmission, -40 to 85°C operating temperature |
| SFP-1G10ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
| SFP-1G10ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
| SFP-1G10BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
| SFP-1G10BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 10 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
| SFP-1G20ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
| SFP-1G20ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
| SFP-1G20BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
| SFP-1G20BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 20 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
| SFP-1G40ALC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, 0 to 60°C operating temperature |
| SFP-1G40ALC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1310 nm, RX 1550 nm, -40 to 85°C operating temperature |
| SFP-1G40BLC | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, 0 to 60°C operating temperature |
| SFP-1G40BLC-T | WDM-type (BiDi) SFP module with 1 1000BaseSFP port with LC connector for 40 km transmission; TX 1550 nm, RX 1310 nm, -40 to 85°C operating temperature |
| SFP-1GEZXLC | SFP module with 1 1000BaseEZX port with LC connector for 110 km transmission, 0 to 60°C operating temperature |
| SFP-1GEZXLC-120 | SFP module with 1 1000BaseEZX port with LC connector for 120 km transmission, 0 to 60°C operating temperature |
| SFP-1GLHLC | SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, 0 to 60°C operating temperature |
| SFP-1GLHLC-T | SFP module with 1 1000BaseLH port with LC connector for 30 km transmission, -40 to 85°C operating temperature |
| SFP-1GLHXLC | SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, 0 to 60°C operating temperature |
| SFP-1GLHXLC-T | SFP module with 1 1000BaseLHX port with LC connector for 40 km transmission, -40 to 85°C operating temperature |
| SFP-1GLSXLC | SFP module with 1 1000BaseLSX port with LC connector for 1km/2km transmission, 0 to 60°C operating temperature |
| SFP-1GLSXLC-T | SFP module with 1 1000BaseLSX port with LC connector for 1km/2km transmission, -40 to 85°C operating temperature |
| SFP-1GLXLC | SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, 0 to 60°C operating temperature |
| SFP-1GLXLC-T | SFP module with 1 1000BaseLX port with LC connector for 10 km transmission, -40 to 85°C operating temperature |
| SFP-1GSXLC | SFP module with 1 1000BaseSX port with LC connector for 300m/550m transmission, 0 to 60°C operating temperature |
| SFP-1GSXLC-T | SFP module with 1 1000BaseSX port with LC connector for 300m/550m transmission, -40 to 85°C operating temperature |
| SFP-1GZXLC | SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, 0 to 60°C operating temperature |
| SFP-1GZXLC-T | SFP module with 1 1000BaseZX port with LC connector for 80 km transmission, -40 to 85°C operating temperature |
Kunder, der kiggede på dette produkt, kiggede også på












egenskaber
beskrivelse
yderligere information



egenskaber
beskrivelse
PDF